Problems That Easily Appears When The Hospital Door Made

In the early stage, the manufacturer of hospital special door is making customized products according to the application requirements of the hospital and the practice of the hospital. Slowly, after the production and processing experience, the manufacturer is constantly improving the status of the hospital special door.

In the later stage, hospital door manufacturers present many imitators. Many small wooden door workshops can not represent the hospital-specific door manufacturer, and they do not have a practical understanding of the products and only copy the appearance. Even in order to reduce the cost of using inferior raw materials, the product quality is poor, which seriously affects the selection of products by customers and disrupts the specific door market of hospitals.

Therefore, in the selection of hospital special door manufacturers, we need to be careful. To pay attention to the following hospital door factory prone to problems:

1. The sides of the hospital doors were warped.

2. The opening keyhole is wrong.

3. Panel is broken and damaged.

4. No glue around the sides, and the bolts are short.

5. There are problems in the quality installation of steel plates, and the door panels of the hospital are not flat.

6. Sometimes there is no adhesive tape on the cover plate. If the slot of the cover plate is enlarged, the school door manufacturer or the hospital door, the adhesive tape cannot be installed.

7. The deck was deformed and bent, with multiple laminates cracked and sometimes steel nails inside.

8. There are black spots on the surface of the panel with uneven color.